ELM327 Yhteensopiva Wireless WiFi autodiagnostiikkatyökalu
virhekoodienlukija ja nollaustyökalu kotiverstaalle ja ammattilaiselle. Sopii lähes kaikille merkeille, kuten Volvolle ja Saabille, sekä kaikille autoille joissa on OBD2-portti lähes kaikki autot vuodesta 1996 eteenpäin). Tuote toimitetaan ilman ohjelmaa. Löydät useita ohjelmia osoitteesta Scantool.net: http://scantool.imechatronics.com/downloads.htm
HUOM! Tämä tuote ei sisällä teknistä tukea. Kaikki autodiagnostiikkatyökalujen käyttö on aina omalla vastuulla.
iPhone - http://www.devtoaster.com/products/rev/ tai https://itunes.apple.com/us/app/fuzzycar/id327822395?mt=8
Tukee kaikkia OBD2 / OBDII / OBD-2 / OBD-II / EOBD -protokolleja. Käytä yhdessä Android-puhelimen, tietokoneen, iphonen tai ipadin kanssa. Elm 327 ei sisällä kaapelia, ainostaan internetyhteyden wifin kautta.
Helppo yhdistää langattomaan verkkoon puhelimen kautta.
ELM327 WIFI OBD diagnostic cable able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.
With proper software installed in the host device, you may have following parameters read out from your vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim
Protocoll: - ISO15765-4 (CAN) - ISO14230-4 (KWP2000) - ISO9141-2 Compatibelt witK: - SAE J1850 PWM (41.6 kbaud) - SAE J1850 VPW (10.4 kbaud) - ISO 9141-2 (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (fast init, 10.4 kbaud) - ISO 15765-4 CAN (11 bit ID, 500 kbaud) - ISO 15765-4 CAN (29 bit ID, 500 kbaud) - ISO 15765-4 CAN (11 bit ID, 250 kbaud) - ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Vehicle Coverage: Work with all obd2 or eobd cars.
Elm327 WIFI - iOS Easy Setup Guide, Dashcommand is recomended.
1- Wifi Settings Search wifi -- Connect to device (SSIS: OBDDevice/CLKDevices) Static Tab -- IP Address: 192.168.0.123 -- Subnet Mask: 255.255.255.0
2- Software Settings Open Software (your iOS sofware (ex: Rev DashCommand, FuzzyCar )) Settings: Interface type : ELM -- Data Port : tcp://192.168.0.10:35000
3- Have Fun!
Free software: Scantool.net GM Mode 22 Scan Tool by Terry OBD Gauge for PalmOS and Pocket PC by Dana Peters OBD Logger by Jonathan Senkerik OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy) obd2crazy.com OBD2 Scantool by Ivan Andrewjeski OBDII for ELM322 by David Huffman pyOBD by Donour Sizemore for MacOSX and Linux RDDTC by Pete Calinski Real Scan by Brent Harris ScanTest for Pocket PC by Ivan Ganev aka a-ser wOBD by WDT
virhekoodienlukija ja nollaustyökalu kotiverstaalle ja ammattilaiselle. Sopii lähes kaikille merkeille, kuten Volvolle ja Saabille, sekä kaikille autoille joissa on OBD2-portti lähes kaikki autot vuodesta 1996 eteenpäin). Tuote toimitetaan ilman ohjelmaa. Löydät useita ohjelmia osoitteesta Scantool.net: http://scantool.imechatronics.com/downloads.htm
HUOM! Tämä tuote ei sisällä teknistä tukea. Kaikki autodiagnostiikkatyökalujen käyttö on aina omalla vastuulla.
iPhone - http://www.devtoaster.com/products/rev/ tai https://itunes.apple.com/us/app/fuzzycar/id327822395?mt=8
Tukee kaikkia OBD2 / OBDII / OBD-2 / OBD-II / EOBD -protokolleja. Käytä yhdessä Android-puhelimen, tietokoneen, iphonen tai ipadin kanssa. Elm 327 ei sisällä kaapelia, ainostaan internetyhteyden wifin kautta.
Helppo yhdistää langattomaan verkkoon puhelimen kautta.
ELM327 WIFI OBD diagnostic cable able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.
With proper software installed in the host device, you may have following parameters read out from your vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim
Protocoll: - ISO15765-4 (CAN) - ISO14230-4 (KWP2000) - ISO9141-2 Compatibelt witK: - SAE J1850 PWM (41.6 kbaud) - SAE J1850 VPW (10.4 kbaud) - ISO 9141-2 (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (fast init, 10.4 kbaud) - ISO 15765-4 CAN (11 bit ID, 500 kbaud) - ISO 15765-4 CAN (29 bit ID, 500 kbaud) - ISO 15765-4 CAN (11 bit ID, 250 kbaud) - ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Vehicle Coverage: Work with all obd2 or eobd cars.
Elm327 WIFI - iOS Easy Setup Guide, Dashcommand is recomended.
1- Wifi Settings Search wifi -- Connect to device (SSIS: OBDDevice/CLKDevices) Static Tab -- IP Address: 192.168.0.123 -- Subnet Mask: 255.255.255.0
2- Software Settings Open Software (your iOS sofware (ex: Rev DashCommand, FuzzyCar )) Settings: Interface type : ELM -- Data Port : tcp://192.168.0.10:35000
3- Have Fun!
Free software: Scantool.net GM Mode 22 Scan Tool by Terry OBD Gauge for PalmOS and Pocket PC by Dana Peters OBD Logger by Jonathan Senkerik OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy) obd2crazy.com OBD2 Scantool by Ivan Andrewjeski OBDII for ELM322 by David Huffman pyOBD by Donour Sizemore for MacOSX and Linux RDDTC by Pete Calinski Real Scan by Brent Harris ScanTest for Pocket PC by Ivan Ganev aka a-ser wOBD by WDT
Article number: 36423
